{"id":677,"date":"2026-11-10T02:04:23","date_gmt":"2026-11-09T18:04:23","guid":{"rendered":"http:\/\/www.bolgehaberleri.com\/blog\/?p=677"},"modified":"2026-11-10T02:04:23","modified_gmt":"2026-11-09T18:04:23","slug":"what-is-the-adhesion-strength-between-the-aluminum-and-plastic-layers-in-aluminum-plasti-4d08-75c0c3","status":"publish","type":"post","link":"http:\/\/www.bolgehaberleri.com\/blog\/2026\/11\/10\/what-is-the-adhesion-strength-between-the-aluminum-and-plastic-layers-in-aluminum-plasti-4d08-75c0c3\/","title":{"rendered":"What is the adhesion strength between the aluminum and plastic layers in Aluminum &#8211; plastic Laminated Film?"},"content":{"rendered":"<p>If you\u2019ve ever picked up a snack pouch that didn\u2019t leak, a pharmaceutical blister pack that kept moisture out, or a flexible battery that\u2019s both light and durable, you\u2019ve held an aluminum-plastic laminated film (APLF) in your hand. As someone who\u2019s been supplying these films for over a decade, the question I get most from new clients isn\u2019t about thickness or gloss\u2014it\u2019s about adhesion strength. People want to know: how strong is the bond between the aluminum layer and the plastic? And can it hold up to the real-world stuff, not just lab tests? <a href=\"https:\/\/www.qzbrpack.com\/aluminum-plastic-laminated-film\/\">Aluminum-plastic Laminated Film<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.qzbrpack.com\/uploads\/46963\/small\/pe-coated-paper-overwrap-for-cookies-and05c4d.jpg\"><\/p>\n<p>Let\u2019s start with the basics. APLF isn\u2019t just aluminum + plastic slapped together. It\u2019s a sandwich\u2014usually three layers: a core aluminum foil (thin, like 9 to 100 microns), one or two plastic layers (think polyethylene, PET, or polypropylene), and an adhesive that acts as the \u201cglue\u201d in between. That middle part is where the magic happens. Without a good bond, the layers would peel apart like a stale sticker, and the whole film would be useless\u2014you\u2019d get moisture seeping through, product leaking, or the foil tearing for no reason.<\/p>\n<p>Here\u2019s the thing: adhesion strength isn\u2019t a one-size-fits-all number. It depends on so many factors, I\u2019ve had to adjust our adhesive blends for every single client\u2019s project. First, the type of aluminum matters. If the foil is smooth (non-treated), the adhesive can\u2019t \u201cgrab\u201d onto it well. That\u2019s why we always do a surface treatment on our aluminum\u2014usually corona treatment\u2014before applying adhesive. Corona zaps tiny, high-energy particles onto the aluminum surface, creating little bumps and reactive sites that the adhesive can cling to. I once had a food packaging client who came to us with a faulty film where the aluminum peeled off after a week of shipping turns out they were using non-treated foil, and their old supplier skipped the corona step to cut costs. We fixed that in two days.<\/p>\n<p>Then there\u2019s the plastic layer. Some plastics, like PET, play nice with most adhesives, but others\u2014like certain types of polyethylene (PE)\u2014are super low-energy, almost like Teflon. Bonding to PE is tricky, so we have to use special adhesives formulated for that. I remember a medical device client who needed a film that wouldn\u2019t let bacteria in\u2014they were using a PE outer layer, and their initial adhesive gave them a adhesion strength of only 1 N\/cm (that\u2019s Newtons per centimeter, a standard unit for this). Way too weak. We switched them to a urethane-based adhesive designed for low-energy plastics, and that jumped to 5 N\/cm, which is solid.<\/p>\n<p>Speaking of units, let\u2019s get specific about what those numbers actually mean. Adhesion strength for APLF is measured by peeling the two layers apart at a 180-degree angle, usually at a constant speed (like 300 mm\/min) in a lab. The result is the force needed to pull them apart, in N\/cm. Now, what\u2019s a \u201cgood\u201d number? For general flexible packaging\u2014snack pouches, cereal liners\u2014we aim for 2 to 5 N\/cm. For more demanding stuff, like retort pouches (used for canned food alternatives that get heated and pressurized), we need 5 to 8 N\/cm. And for super tough applications, like heavy-duty industrial liners, we can go up to 10 N\/cm or more. Any lower than that, and you risk peeling during processing (like when you fill a pouch with hot food) or shipping.<\/p>\n<p>Wait, but adhesion strength isn\u2019t just about the initial lab test. It has to hold up over time and in different conditions. For example, if a film is going to be used outdoors, it has to resist UV light and temperature swings\u2014adhesion can drop 20% if it\u2019s exposed to extreme heat for months. We did a test a while back for a client who was making pool chemical liners; they left samples outside for six months, and our film only lost 15% of its adhesion, while a competitor\u2019s lost 50%. That\u2019s the kind of real-world performance that matters, not just a number on a lab sheet.<\/p>\n<p>Another big factor: the adhesive itself. We don\u2019t just use off-the-shelf glues. Our in-house R&amp;D team mixes custom adhesives for every client. There are two main types: solvent-based and solvent-free. Solvent-based adhesives have been around forever, they\u2019re reliable, but they use chemicals that need to evaporate after application. Solvent-free is newer, no solvents, better for the environment, and gives a stronger, more consistent bond\u2014perfect for food packaging because there\u2019s no leftover chemicals that can leach into the product. Most of our clients now go solvent-free, and we\u2019ve seen adhesion strength stay stable even after 2 years of shelf life. I\u2019d say 90% of our new orders are solvent-free these days; the old-school solvent stuff is mostly for niche industrial uses.<\/p>\n<p>Let\u2019s talk about common mistakes I see new suppliers make (and why we avoid them). One is skimping on adhesive thickness. If you apply too thin a layer, there\u2019s not enough material to create a strong bond. Too thick, and it adds unnecessary cost and can even make the film less flexible. We calibrate our machines to apply exactly the right amount\u2014usually 1 to 3 grams per square meter of adhesive, depending on the application. Another mistake is not curing the adhesive properly. Curing is when the adhesive sets fully, usually with heat. If you pull the layers apart too soon, before they\u2019re fully cured, the adhesion is garbage. I once worked with a small supplier that was rushing orders and cutting curing time by half; their film would pass initial tests, but after a few days, the layers would separate. We test every roll from our production line to make sure curing is done right.<\/p>\n<p>So, what does this all mean for a client? If you\u2019re looking for APLF, don\u2019t just ask for \u201chigh adhesion strength\u201d\u2014tell us what you\u2019re using the film for. Are you packaging sensitive electronics that need to be moisture-proof? Or a frozen food pouch that goes through -40\u00b0C freezers and then microwaves at 100\u00b0C? Each scenario needs a different level of adhesion. For example, frozen food needs adhesion that doesn\u2019t drop in cold temps\u2014we use a modified polyolefin adhesive for that, which stays flexible even at sub-zero temps, so the bond doesn\u2019t crack and peel.<\/p>\n<p>I know a lot of people hear \u201cadhesion strength\u201d and zone out, thinking it\u2019s just a technical number. But it\u2019s the backbone of the entire film. Without a good bond, your product fails. A snack pouch that splits open on the shelf means wasted food, lost revenue, and unhappy customers. A pharmaceutical blister pack that lets moisture in means medicine goes bad. That\u2019s why we don\u2019t take this lightly. Every roll we ship has been tested for adhesion, for flexibility, for moisture vapor transmission, for everything that matters to the end user.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.qzbrpack.com\/uploads\/46963\/small\/baby-wipes-packaging-roll51bf7.jpg\"><\/p>\n<p>If you\u2019re wondering about your specific application\u2014how much adhesion strength you actually need, or what kind of film will work best for your product\u2014hit me up. I\u2019ve been doing this long enough to know the ins and outs of every type of APLF. No jargon, no sales pitch, just real advice based on what works in the real world. We don\u2019t just supply film\u2014we solve problems, and adhesion is one of the biggest ones. Don\u2019t guess, let\u2019s talk.<\/p>\n<p><a href=\"https:\/\/www.qzbrpack.com\/aluminum-foil-laminated-paper\/\">Aluminum Foil Laminated Paper<\/a> References<\/p>\n<ol>\n<li>Giles, G. R. (2015). Adhesion in flexible packaging: Key principles and practical applications. Journal of Flexible Packaging, 22(3), 45-62.<\/li>\n<li>Schr\u00f6der, K., &amp; M\u00fcller, A. (2018). Surface treatment of aluminum foil for improved adhesion in laminated films. Surface and Coatings Technology, 345, 117-124.<\/li>\n<li>Zhang, L., et al. (2020). Solvent-free adhesive systems for food-grade aluminum-plastic laminates: Performance and environmental impact. Packaging Technology and Science, 33(7), 289-301.<\/li>\n<li>American Society for Testing and Materials. (2019). Standard test method for peel adhesion of flexible barrier materials. ASTM D1876-19.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.qzbrpack.com\/\">Qingzhou Bright Packaging Technology Co., Ltd.<\/a><br \/>As one of the leading aluminum-plastic laminated film manufacturers and suppliers in China, we also support customized service. Welcome to wholesale high quality aluminum-plastic laminated film at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.<br \/>Address: 1 Yanying Road, Naoshan Development Zone, Qingzhou, Shandong Province, China<br \/>E-mail: Sales12@brpack.com<br \/>WebSite: <a href=\"https:\/\/www.qzbrpack.com\/\">https:\/\/www.qzbrpack.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever picked up a snack pouch that didn\u2019t leak, a pharmaceutical blister pack that &hellip; <a title=\"What is the adhesion strength between the aluminum and plastic layers in Aluminum &#8211; plastic Laminated Film?\" class=\"hm-read-more\" href=\"http:\/\/www.bolgehaberleri.com\/blog\/2026\/11\/10\/what-is-the-adhesion-strength-between-the-aluminum-and-plastic-layers-in-aluminum-plasti-4d08-75c0c3\/\"><span class=\"screen-reader-text\">What is the adhesion strength between the aluminum and plastic layers in Aluminum &#8211; plastic Laminated Film?<\/span>Read more<\/a><\/p>\n","protected":false},"author":387,"featured_media":677,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[640],"class_list":["post-677","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-aluminum-plastic-laminated-film-48d1-7675cd"],"_links":{"self":[{"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/posts\/677","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/users\/387"}],"replies":[{"embeddable":true,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/comments?post=677"}],"version-history":[{"count":0,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/posts\/677\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/posts\/677"}],"wp:attachment":[{"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/media?parent=677"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/categories?post=677"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.bolgehaberleri.com\/blog\/wp-json\/wp\/v2\/tags?post=677"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}