If you’ve ever worked with heavy-duty aerospace, automotive, or industrial gear, chances are you’ve stumbled on titanium forgings—and if you’re here, you’re probably asking the same question most engineers and project managers do: just how big can these things get? As a titanium forgings supplier who’s been in this game for over a decade, I get it. Too big, and you’re stuck with a part that’s either impossible to machine or way too costly to ship. Too small, and you’re back to welding multiple pieces together, which introduces weak points that can sink a whole build. Let’s cut through the jargon and break this down like we would over a coffee with a client who’s scrambling for a part that checks every box. Titanium Forgings

First, let’s start with what makes titanium forgings different from, say, steel or aluminum ones. Titanium’s strong, lightweight, corrosion-resistant—but it’s also a total pain to work with. Its high melting point (around 3,000°F, way higher than steel’s ~2,600°F) and tendency to react with mold materials when heated means the maximum size isn’t just a number we pull out of thin air. It depends on three big factors: the type of forging press we use, the grade of titanium, and the complexity of the part. No two projects are the same, so there’s no one-size-fits-all answer, but I’ll lay out the realistic limits we run into every day, plus what that means for your next project.
Let’s talk about presses first, because that’s the backbone of any forging operation. A forging press uses massive force to shape hot titanium into a solid, grain-consistent part—no porosity, no weak spots, which is why forgings are go-to for jet engine blades, offshore oil rig components, and even racing car parts. The bigger the press, the more force it can apply, and the bigger the part it can handle. Most commercial titanium forging suppliers (that’s us, included) have two main press categories: 1,000-ton to 5,000-ton presses, and then the big dogs—10,000-ton to 25,000-ton presses that are basically industrial behemoths.
With the smaller presses (under 5,000 tons), we’re limited to parts that top out at around 6 feet in length and 3 feet in width. That’s perfect for small to medium parts like fasteners, engine brackets, or even prosthetic hip joints. But here’s the thing: when you push a 5,000-ton press to its absolute limit, you might get a part that’s a touch over that, but the grain structure gets a little uneven, which is a no-go for aerospace parts that have to pass strict FAA tests. We never cut corners there—even if a client begs, we’ll stick to the safe, tested limit.
Now the big 10,000-ton plus presses? That’s where the maximum size jumps way up. Our 15,000-ton press, for example, can handle titanium forgings up to 12 feet in length, 4 feet in width, and 2 feet in thickness. Wait, hold on—thickness matters, too. A long, thin titanium sheet forged on a big press is way easier than a thick, heavy block. If you need a structural beam for a ship, that’s going to be thick, so our max for a structural beam is closer to 10 feet. If it’s a flat plate for a chemical processing tank, we can go almost the full 12 feet. That makes sense, right? More material means more force needed, and more chance of defects.
Next up: titanium grade. Not all titanium is created equal, and that changes the size limit too. Grade 5 titanium (Ti-6Al-4V) is the workhorse—used in 70% of all titanium parts, it’s strong, weldable, and forgiving when heated. We can forge Grade 5 parts up to that 12-foot mark no problem. But Grade 23 (Ti-6Al-4V ELI), which is super pure and used in medical devices, is a little trickier. It’s more ductile but tends to crack if you stretch it too far, so our max for Grade 23 is around 8 feet—still big, but not the full 12. Then there are the exotic grades, like Grade 12, which is great for corrosion resistance but harder to shape. We can only go up to 6 feet with those, because they need way more force to deform without breaking.
Complexity of the part is the third piece of the puzzle. If you want a simple, straight block or a flat disc, we can push the press to its limit. But if you need a part with intricate details—like turbine blades with curved edges, or holes cut into a thick plate for a heat exchanger—we have to account for the extra material we need to leave for machining. Those details mean the raw forging is going to be smaller, because we can’t stretch the titanium as much to get those sharp angles. For example, a simple titanium disc might be 12 feet wide, but a turbine blade with multiple cooling channels? That raw forging is only 5 feet wide, because we have to shape the grain around the curves instead of stretching it out.
Wait, but let’s talk about outliers. I’ve had clients ask if we can go bigger than 12 feet. Last year, a wind energy client needed a titanium hub for a offshore turbine—15 feet long, 5 feet wide. We had to special-order a larger billet, use our 20,000-ton press, and even had to work with a metal lab to make sure the grain structure stayed consistent. It took three extra weeks and cost 20% more, but we pulled it off. That’s the key here: the “maximum” size isn’t a hard line in the sand—it’s a limit we adjust based on what you need, as long as you’re okay with extra lead time and cost.
Now, let’s bust a common myth: some people think titanium forgings are too big for most projects, so they just weld smaller parts together. But here’s the catch with welding: every weld is a weak point, especially in titanium. When you weld two pieces, the heat changes the grain structure around the weld, making it more likely to crack or corrode over time. For high-stakes applications—like aircraft, nuclear power, or deep-sea gear—forging a single solid part is non-negotiable, even if it costs a little more. That’s why our biggest clients aren’t just aerospace companies; they’re defense and energy firms that need parts that can’t fail, no matter what.
So, how do you figure out the right size for your project? Let’s run through a quick checklist. First, what grade of titanium do you need? If it’s Grade 5, we’re starting at 10 feet; if it’s Grade 23, shoot for 7 or 8 feet. Second, what’s the part’s complexity? Simple shapes = bigger, intricate = smaller. Third, do you need it in a hurry? If lead time is less than 6 weeks, we can’t push for a size over 10 feet—bigger parts take longer to heat, forge, and inspect. Fourth, what’s your budget? The bigger the part, the more material and press time it takes, so expect to pay 15-30% more for parts over 10 feet.
As a supplier, we also do custom work for parts that are on the edge of what’s possible. If you need a 14-foot part, we don’t just say “no” right away—we test a small sample of titanium to see how it behaves under that much force, check the grain structure, and give you a quote. We’ve pulled off some wild projects over the years: a 11-foot titanium plate for a chemical plant, a 7-foot gear for a mining tractor, even a 9-foot bracket for a bridge. None of those were “standard,” but we made them work because that’s what clients need.
One thing I’ll emphasize: size isn’t the only factor. A 12-foot titanium part that’s 1 inch thick is way easier to make than a 6-foot part that’s 12 inches thick. Thick parts need more pressure, longer heating time, and extra inspections to make sure there are no internal flaws. That’s why we always do non-destructive testing (NDT) on every part—ultrasonic scans, X-rays, even stress tests—regardless of size. We don’t send out a part that could fail, no matter how big or small it is.
Another common question: can we ship parts that are over 10 feet long? Short answer: yes, but you’ll need to plan for that. Oversize freight is more expensive, and you might need special permits to ship them cross-country or internationally. We work with trusted freight companies that specialize in large industrial parts, so we can help you figure out shipping costs and logistics if that’s a concern. A lot of clients don’t think about that until it’s too late, so it’s good to bring it up early.
Let’s wrap this up. The maximum size of a titanium forging isn’t a single number—it’s a flexible range that starts around 6 feet for small, intricate parts and goes up to 12 feet (with occasional outliers up to 15 feet) for simple, thick parts, depending on the grade and press we use. But here’s the thing: that number only matters if it fits your project. If you’re building a small component, a 4-foot part is more than enough and will save you money. If you’re building a turbine hub, you need that 12-foot solid forging to keep it safe.

At the end of the day, the goal of any good titanium forging supplier isn’t just to tell you a size—it’s to help you find the right part, the right size, and the right grade for your needs. If you’re working on a project and you’re not sure if your desired size is possible, don’t guess. Reach out, tell us what you’re making, what specs you need, and we’ll walk you through it. We’ll answer questions like, can we forge that? What’s the lead time? What will it cost? No fluff, no jargon, just straight talk about what works for your build.
Tantalum Products References:
- “Titanium Forging Fundamentals,” Forging Industry Association, 2022
- Aerospace Materials Handbook, SAE International, 2021
- “Advances in Large-Scale Titanium Forging,” Journal of Manufacturing Processes, Vol. 45, 2020
- Medical Titanium Alloys: Properties and Applications, ASTM International, 2019
China Super Tech Co., Ltd.
As one of the most professional titanium forgings manufacturers and suppliers in China, we warmly welcome you to buy OEM titanium forgings from our factory. All custom made products are with high quality and competitive price. Contact us for quotation.
Address: Wangjing Science and Technology Park, Guangshun North Street, Chaoyang District, Beijing
E-mail: sales@moly-tungsten.com
WebSite: https://www.moly-tungsten.com/