Posted in

What is the best drilling cutter for rock?

Let’s get real for a second – when I get a text at 2 a.m. from a customer who just fried a set of drilling cutters on a granite well in West Virginia, I don’t have time to pull up a generic “best drilling cutter” blog. I’ve been selling these things for 12 years, and half the time, the guys asking “what’s the best” don’t need a one-size-fits-all answer – they need someone who knows their rock, their job, and why the cutter they used last week worked great for sandstone but turned to dust on basalt. That’s why I’m writing this now, not from an office, but from my truck in a parking lot outside a job site in Ohio, where the operator just called to say his previous cutters didn’t last half the shift he needed them to. Drilling Cutter

First, let’s talk about what “best” even means here. If you’re a horizontal directional drilling guy pulling fiber optic lines through soft, layered shale, your definition of “best” is probably “fast, cheap, and doesn’t skip” – not something that costs $500 a piece when you only need 10. If you’re a mineral exploration geologist drilling 10,000 feet deep into hard, abrasive gneiss, “best” is “doesn’t snap off mid-drill and cost us three days of downtime.” I’ve seen guys drop $2,000 on a set of diamond cutters for a job that would’ve been way better with a set of carbide insert cutters that cost a quarter of the price and lasted twice as long. That’s the mistake most new drillers make, and it’s the same mistake I see vendors push when they sell you something you don’t need.

Let’s start with the workhorses – tungsten carbide insert (TCI) cutters. These are the ones I move the most volume of, hands down. They’re made by pressing a tiny, super-hard tungsten carbide tip into a steel body, and they get their edge from that insert, not from the steel itself. What makes TCI cutters great? They’re durable, versatile, and way more affordable than diamond options for most medium to hard rock applications. I’ve had customers use them for everything from limestone to sandstone to even soft basalt, as long as they’re the right size and grade of insert. Here’s the catch: not all TCI inserts are the same. You’ve got different grades of carbide – some are tough (good for impact, like if you’re drilling through rock with a lot of cracks or boulders), some are hard (good for abrasive rock, like granite, where you don’t want the edge to wear down too fast). Last year, a customer in Pennsylvania called me panicking because his TCI cutters were wearing out in two days on a gravelly sandstone. I swapped his generic 10% cobalt carbide inserts for our 15% high-toughness inserts, and he texted me three days later saying they were still going strong, no slowdowns. The mistake he made was buying the cheapest TCI cutters he could find online, not asking someone who knows what grade works for his rock. TCI cutters are the best pick for 60% of the drilling jobs I see, especially if you’re not drilling the hardest, most abrasive rock out there.

But then there’s diamond impregnated cutters – often just called “diamond cutters.” These are the ones with tiny diamond particles embedded in a metal matrix on the face of the cutter. They’re for the heavy stuff: hard rock, abrasive rock, deep drilling, mineral exploration. I don’t sell these as much as TCI, but when I do, it’s for jobs where TCI would just not cut it. Let’s be clear – diamond cutters aren’t better than TCI across the board. They’re more expensive, and they work best when they’re run at the right speed and pressure. If you run a diamond cutter too slow, the matrix wears too fast and the diamonds fall out before they do any work. If you run it too fast, the diamonds chip. I had a customer drilling for lithium in Nevada last year – he was trying to use TCI cutters on the hard, quartz-rich rock there, and his inserts were snapping off left and right. We switched him to diamond cutters with a medium-fine grit, and he ended up drilling 200 feet further than he’d planned without replacing his cutters. That’s the win diamond cutters deliver, but only when you match them to the right job. Another thing to note: diamond cutters come in different matrix grades too. Soft matrix for soft rock (so the diamonds wear out and expose new ones), hard matrix for hard rock (so the matrix doesn’t wear too fast). I’ve seen guys use a soft matrix diamond cutter on granite and they burned through them in hours, when a hard matrix would’ve lasted days.

Now, what about the middle ground? There’s also PDC cutters – polycrystalline diamond compact. Wait, I get a lot of questions about these, and I have to be honest: PDC cutters are super popular for oil and gas drilling, but I don’t recommend them for a lot of the smaller drilling jobs my customers do. PDC has a thin layer of diamond fused to a tungsten carbide substrate, and they’re great for cutting through soft to medium-hard rock fast. But they’re terrible for impact. If you’re drilling through fractured rock, or rock with boulders, a PDC cutter will chip its diamond edge before you even finish the first 10 feet. I had a landscaping contractor try to use PDC cutters for a water line install through a rocky part of his yard, and he broke three of them on a single 50-foot run. He swapped to TCI cutters, and the job went without a hitch. So PDC is out for most of the jobs my customers are doing, but if you’re in oil and gas, drilling through uniform shale or soft limestone, they’re the fastest option out there – just don’t bring them to a fight with boulders.

Wait, let’s not forget about the wild cards – specialty cutters, for the weird jobs. I’ve sold diamond-impregnated cutters with a hard facing for drilling through reinforced concrete for road projects. I’ve sold TCI cutters with serrated edges for drilling through layered rock that tends to slip. And I’ve even sold custom-sized cutters for a guy who was drilling ancient ruins in Mexico, where he needed cutters that wouldn’t chip the fragile stone. Those are the jobs where “best” is totally custom, which is why I don’t just give out a one-size-fits-all answer.

Let’s break this down by rock type, because that’s the real deciding factor, not what’s the most expensive or what I have in stock. If you’re drilling soft rock (shale, clay, soft limestone, sandstone up to 5,000 psi), TCI cutters work great, and even PDC is an option if you don’t have a lot of impact. If you’re drilling medium rock (hard limestone, granite up to 10,000 psi, medium sandstone), TCI with a hard insert grade is perfect, or diamond cutters if you need extra longevity. If you’re drilling hard, abrasive rock (basalt, gneiss, quartzite over 10,000 psi), diamond cutters are your best bet – just make sure you get the right matrix grit for the rock. And if you’re drilling through any rock with cracks, boulders, or high impact, skip the diamond or PDC, stick with tough TCI inserts that can take the beating.

I’ve seen too many customers waste money on the wrong cutters, and that’s why I always tell them to send me a sample of their rock, or at least tell me what kind of rock they’re drilling, how deep, how much they need to drill, and if there’s any impact (like boulders or fractured rock). Last month, a customer from Texas called, said he needed the “best drilling cutter for rock” for a water line install through hard limestone. I asked him how deep he was going, and he said 20 feet. I told him he didn’t need diamond cutters – $300 TCI cutters would last him the whole job, and he’d save $1,700. He later texted me a pic of his crew, holding the spent TCI cutters, and said they’d drilled all 20 feet and could’ve done another 10. That’s the value of not guessing – someone who knows the products and the job can save you a ton of time and money.

But wait, there’s another part to “best” that a lot of people miss: the vendor. I’ve had customers tell me they bought cutters from a big-box supplier online, and half the set was defective, or the grade was mislabeled. I sell cutters direct, but I also work with local dealers, and I stand behind every cutter I sell. If a customer’s cutters wear out prematurely, or break for no reason, I don’t make them jump through hoops to get a replacement – I send them a new set, no questions asked. A lot of the big online vendors don’t do that, and that’s why I tell my regulars to call me before they buy anything. You could get the “best” cutter on paper, but if it’s defective, or you run out of replacement parts mid-job, it’s useless.

Let’s talk about some common myths, too. A lot of guys think diamond is always better. No. If you’re drilling 50 feet of soft shale, diamond is overkill, and you’re wasting money. Another myth: TCI cutters are all the same. Nope, like I said earlier, the grade of carbide, the size of the insert, how it’s pressed into the body – all that matters. A cheap TCI cutter from Amazon will have a loose insert that falls out after 10 feet, while a quality TCI cutter from a reputable supplier will have a insert pressed with enough force to last hundreds of feet. I’ve tested this myself – I bought two sets of TCI cutters, same size, from two different vendors, and the cheap one wore out after 12 feet, the quality one lasted 112 feet. That’s a huge difference.

And what about longevity vs. speed? Sometimes, a cutter that lasts longer is slower, which means you finish the job faster overall, because you’re not replacing cutters every hour. Sometimes, a faster cutter that wears out faster is better, if you can get the job done in a day. That’s another thing I talk to customers about – their priority. Do they need to finish fast, or do they need cutters that will last so they don’t have downtime? For example, a utility company laying fiber, they need speed, so sometimes we’ll go with a slightly less durable TCI cutter that cuts faster, even if it needs replacing more often. A mineral exploration company, they need durability, so even if it takes a little longer per foot, we go with diamond cutters that will last thousands of feet.

Let’s wrap this up. The best drilling cutter for rock isn’t a single product – it’s the one matched to your rock type, your job requirements, and your budget. If you’re working soft to medium rock with low impact, quality tungsten carbide insert (TCI) cutters are the best value and most versatile pick. If you’re working hard, abrasive rock with high longevity needs, diamond impregnated cutters will outlast TCI and save you money in the long run. If you’re in oil and gas drilling uniform soft to medium rock, PDC cutters offer unmatched speed, but only if you don’t have impact. And never forget that the vendor you buy from matters as much as the cutter itself – a good supplier will help you pick the right product, stand behind it, and get you replacements when you need them, so your job doesn’t get held up.

I’ve been doing this long enough that I can look at a pic of your rock, listen to what you’re drilling, and tell you exactly what cutter you need. No gimmicks, no upselling you something you don’t need, just straight talk about what will get your job done right, on time, and without wasting your money on cutters that are wrong for the job. If you’re tired of cutters breaking mid-drill, wearing out too fast, or costing you more than they should, give me a call. We can talk about your specific job, get you the right cutters, and make sure you’re set up for success. No generic answers, no pressure, just someone who’s been in your shoes, and knows what works.

Precision Parts References:

  1. "Drilling Cutters: Types, Applications, and Selection Criteria" – International Journal of Rock Mechanics and Mining Sciences, 2021.
  2. Tungsten Carbide Insert (TCI) Cutters Performance in Medium to Hard Rock Drilling – Society of Petroleum Engineers, Drilling Conference, 2019.
  3. Diamond Impregnated Cutter Matrix Design for Abrasive Rock Applications – Journal of Materials Processing Technology, 2020.
  4. Polycrystalline Diamond Compact (PDC) Cutter Failure Modes in Fractured Rock – Journal of Petroleum Science and Engineering, 2018.
  5. "Selection of Drilling Tools for Construction and Exploration Drilling" – National Drilling Association, 2022.

Kunshan Zhiyi Dingli Cemented Carbide Tool Co., Ltd.
We are one of the most professional drilling cutter manufacturers and suppliers in China, also support customized service. We warmly welcome you to wholesale high quality drilling cutter made in China here from our factory. If you have any enquiry about cooperation, please feel free to email us.
Address: No.80 Chuangfu Road, Qiandeng Town, Mondragon Industrial Park, Kunshan City, Suzhou, Jiangsu, China.
E-mail: 2060056236@qq.com
WebSite: https://www.kszydl.net/