Posted in

How are chlorinated solvents regulated globally?

A couple of years ago, I was on a call with a manufacturing plant manager in the Midwest, United States. He was panicking because his entire production line relied on tetrachloroethylene (PCE) for degreasing metal parts, and his local environmental agency had just dropped a new permit requirement he’d never heard of. “I’ve been using this chemical for 15 years,” he said, “and suddenly it feels like I’m navigating a maze no one bothered to map.” That conversation stuck with me. As a chlorinated solvents supplier, I don’t just move chemicals from factories to users—I’ve spent years learning the global patchwork of rules that governs these materials, and today, I want to break down how chlorinated solvents are regulated around the world, what that means for people like that plant manager, and what it means for my work as a supplier. Chlorinated Solvents

Chlorinated solvents are a broad group of chemicals used in everything from metal degreasing, dry cleaning, and electronics manufacturing to pharmaceutical production and even oil extraction. The most common ones—PCE, trichloroethylene (TCE), 1,1,1-trichloroethane, and methylene chloride—are valued for their ability to dissolve oils, greases, and other contaminants quickly, without leaving residue. But they also have a dark side: most are volatile organic compounds (VOCs), many are classified as probable human carcinogens, and their improper disposal or accidental release can contaminate groundwater for decades. That’s why regulation is so strict, but it’s also why it varies wildly from country to country, and even within regions of the same country.

Let’s start with the United States, since that’s where I’m based, and where most of my long-term clients are. The regulation of chlorinated solvents here falls under three main federal agencies, each with overlapping but distinct roles. The Environmental Protection Agency (EPA) is the primary body overseeing these chemicals, and their rules have evolved dramatically over the past 40 years. Back in the 1970s and 1980s, as more research linked TCE and PCE to cancer and developmental harm, the EPA classified these solvents under the Toxic Substances Control Act (TSCA), the main law governing industrial chemicals. For decades, TSCA was widely criticized as toothless—chemical companies could bring new substances to market without proving they were safe, and existing chemicals were rarely reviewed. That changed with the 2016 Frank R. Lautenberg Chemical Safety for the 21st Century Act, which overhauled TSCA and required the EPA to review all “high-priority” chemicals for risk. In 2022, the EPA released a final rule on TCE, for example, classifying it as a human carcinogen and banning most non-essential uses—like consumer products, residential use, and even some industrial uses where alternatives exist. PCE got a similar risk rule in 2023, limiting its use in dry cleaning (another common PCE application) and imposing strict emission limits for industrial sites.

But regulation in the U.S. isn’t just federal. The Occupational Safety and Health Administration (OSHA) sets workplace exposure limits (PELs) for chlorinated solvents. The current PEL for TCE is 100 parts per million (ppm) as an 8-hour time-weighted average (TWA), though many industry groups have pushed for that to be lowered, and California’s own Office of Environmental Health Hazard Assessment (OEHHA) has set a much stricter “no significant risk level” (NSRL) for TCE of 0.001 ppm, meaning even tiny amounts over a working lifetime could pose a cancer risk. Then there’s the state level: California, Texas, and the Northeast states have some of the strictest rules in the country, while states like Wyoming or Iowa have fewer onerous reporting requirements for small-volume users. That’s the maze that Midwest plant manager was talking about. He had to comply with OSHA workplace limits, EPA emission rules, and his state’s groundwater protection standards, all while making sure he didn’t run afoul of local zoning laws that ban certain solvent uses in industrial parks.

Now, if we cross the Atlantic to the European Union, the framework is different but no less strict. The EU’s main law governing industrial chemicals is REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals), which came into effect in 2007. REACH is based on the principle of “substance of very high concern” (SVHC), which is assigned to chemicals that are carcinogenic, mutagenic, toxic to reproduction (CMR), persistent, bioaccumulative, and toxic (PBT), or very persistent and very bioaccumulative (vPvB). TCE, PCE, and methylene chloride are all on the SVHC list, and in 2020, the EU’s Chemical Agency (ECHA) banned almost all uses of TCE by 2025, with only limited exemptions for specific industrial processes where no alternative exists. For chlorinated solvents used in manufacturing, EU users also have to comply with the Industrial Emissions Directive (IED), which sets limits on air and water pollution from industrial sites, and the Water Framework Directive, which requires member states to protect groundwater from solvent contamination.

One key difference in the EU is that regulation is harmonized across all 27 member states, so a manufacturer in Germany will face almost the same rules as a manufacturer in Poland, though some countries have implemented stricter national limits. For example, France has banned PCE from all dry cleaning operations entirely, while Italy still allows small-scale use with additional safety controls. That consistency is a relief for clients that operate across multiple EU countries, but it also means that non-compliance can result in heavy fines—sometimes up to 4% of a company’s global annual revenue. I’ve had several clients move production from the U.S. to the EU to avoid outdated U.S. rules, only to hit a wall when they realized how strict REACH actually is.

Moving to Asia, the regulation of chlorinated solvents is a mixed bag. Countries like Japan and South Korea have some of the strictest rules in the region, while others are still building their frameworks. Japan adopted its Chemical Substance Control Law (CSCL) in the 1970s, and has since updated it to align with global standards. TCE and PCE are classified as Class 1 Specified Chemical Substances, meaning their production, import, and use are heavily regulated, with strict emission limits for industrial facilities. South Korea’s Chemical Control Act is similar, and in 2021, the country added methylene chloride to its list of restricted substances, banning most uses in consumer products and setting exposure limits for workplaces.

But in other parts of Asia, the picture is less clear. China, which is one of the largest consumers of chlorinated solvents for electronics manufacturing and metal degreasing, has made big strides in recent years to update its chemical regulations. The Ministry of Ecology and Environment (MEE) issued a revised list of controlled hazardous chemicals in 2022, which includes most common chlorinated solvents, and has started enforcing strict limits on industrial emissions in major industrial zones like the Pearl River Delta. However, enforcement is inconsistent across regions—factories in coastal Guangdong might face rigorous inspections, while smaller factories in inland provinces might operate with less oversight. India, another major consumer, has its own Chemical Accident and Emergency Preparedness and Response Act, and the Central Pollution Control Board (CPCB) has set exposure limits for TCE and PCE, but many small and medium-sized enterprises (SMEs) in India still use chlorinated solvents without proper permits or safety controls. That’s a challenge for suppliers like me: we have to tailor our sales to each market, making sure clients understand not just the rules today, but how they’re likely to change in the next 5 years.

One trend I’ve seen across all regions over the past decade is a steady shift away from older chlorinated solvents toward safer alternatives, but that’s a double-edged sword. On one hand, it’s a win for the environment and worker safety—solvents like n-propyl bromide and certain hydrofluoroethers (HFEs) are often marketed as lower-risk alternatives, though they come with their own set of regulatory questions. On the other hand, many of these alternatives are more expensive, less effective for specific applications, and not widely available in low-income countries. That’s why I often work with clients to help them transition to compliant solvents, rather than just pushing for a full switch. For example, a dry cleaner in Spain might have to phase out PCE by 2025, but I can help them source a non-chlorinated solvent that’s already approved under EU REACH, rather than forcing them to invest in untested new chemicals.

Another key part of my work as a supplier is staying ahead of regulatory changes, because missing a new rule can cost a client tens of thousands of dollars in fines, or even shut down their operations. Just last year, the EPA announced a new rule requiring all facilities that use more than 100 pounds of TCE per year to report their emissions and waste disposal practices, even if they’re in full compliance with existing limits. I started working with all my U.S. clients six months before the rule went into effect, helping them update their paperwork and adjust their storage practices to avoid penalties. In Europe, ECHA regularly updates its SVHC list, and I have a dedicated compliance team that monitors new additions so I can alert my clients before a substance they use is banned or restricted.

I also work closely with industry associations like the Chlorinated Solvent Industry Alliance (CSIA) in the U.S. and the European Chlorinated Solvent Association (ECSA) to advocate for balanced regulation. It’s important to note that not all regulations are bad for businesses—strict rules level the playing field, ensuring that every competitor is held to the same standard, and they reduce the risk of costly lawsuits from contaminated groundwater or worker health issues. For example, a plant that properly disposes of chlorinated solvents to meet EPA limits is much less likely to face a multi-million-dollar cleanup order decades later than one that cuts corners.

Of course, regulation isn’t perfect. I’ve seen cases where rules are written without enough input from chemical users or suppliers, leading to unintended consequences. A few years ago, a U.S. state passed a rule banning the use of TCE in small metal degreasing operations, not realizing that most of these operations couldn’t afford the new equipment needed to switch to alternatives. The rule was revised after six months, but not before a dozen small businesses were forced to close. That’s why I always make sure to share real-world use cases with regulators when new rules are being drafted, pushing for flexibility that allows small businesses to comply without going out of business.

So, what does all this mean for clients, and for anyone working with chlorinated solvents? The biggest takeaway is that regulation is not a one-size-fits-all system—you can’t assume that the rules that apply in your home country will apply when you expand to another market, and you can’t rely on old rules that were in place 5 or 10 years ago. As a supplier, my job is to be a partner, not just a vendor. I help clients navigate permits, understand workplace safety limits, source compliant alternatives, and stay ahead of new rules before they become a problem.

If you’re a manufacturer, dry cleaner, electronics producer, or any business that uses chlorinated solvents, navigating this global regulatory landscape doesn’t have to be overwhelming. You don’t have to do it alone. Whether you’re based in the U.S., Europe, Asia, or anywhere else, partnering with a supplier that has deep experience in regulatory compliance can save you time, money, and the headache of non-compliance. We can walk you through the requirements specific to your region, help you find the right solvent for your application that meets all global standards, and support you as you transition to more sustainable, compliant practices.

If you’d like to talk more about how current or upcoming regulations might affect your operations, or if you need help sourcing compliant chlorinated solvents or alternatives, don’t hesitate to reach out. We’re here to help you every step of the way.

Amide Solvents References
U.S. Environmental Protection Agency. (2022). Risk Evaluation for Trichloroethylene.
U.S. Environmental Protection Agency. (2023). Risk Evaluation for Tetrachloroethylene.
European Chemical Agency. (2020). Restriction of Trichloroethylene.
European Chemical Agency. (2023). Substances of Very High Concurrence Candidate List.
Japan Ministry of Economy, Trade and Industry. (2022). Chemical Substance Control Law Updated Regulations.
China Ministry of Ecology and Environment. (2022). Controlled Hazardous Chemicals List.


Changzhou Qiuyi Materials Co., Ltd.
As one of the most professional chlorinated solvents manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please rest assured to buy bulk customized chlorinated solvents made in China here from our factory. Welcome to contact us for pricelist.
Address: Units 13-320 & 322, Yangtze River Plastic & Chemical Market, No. 600 Tongjiang Middle Road, Xinbei District, Jiangsu Province
E-mail: qiuyimaterials@163.com
WebSite: https://www.cnqiuyi.com/