Hey there! If you’ve ever ordered takeout, grabbed a pack of berries from the grocery store, or stored leftover soup in a plastic container that clicks shut with that perfect, little "snick" sound, you know exactly what an attached lid container (ALC) is. I’ve been supplying these bad boys to cafes, grocery chains, and small business owners for over 8 years now, and hands down the question I get asked most—next to "can I get a bulk discount?"—is: "Can these things even be recycled?" Attached Lid Containers

It makes total sense, right? We’re all trying to do better by the planet. Last year, I had a regular customer who runs a small bakery pull me aside after I dropped off a shipment of those 12oz ALCs they use for cookie dough. "Look," they said, holding up a used container covered in flour, "I love how these keep my dough fresh, but if I can’t recycle ’em, what’s the point?" That stuck with me—because it’s not just about selling containers; it’s about making sure we’re all on the same page when it comes to actually handling them once they’re done.
Let’s cut through the clutter here. ALCs are typically made from #5 plastic, which is polypropylene (PP). If you’ve ever looked at the recycling symbol on the bottom of a plastic bottle, you’ll see numbers 1 through 7—#5 is that little triangle with a 5 inside it. I’ve worked with this plastic for so long, I can spot it from a mile away: it’s sturdier than #1 or #2, it resists high temps (great for takeout that goes from microwave to counter), and it’s way more flexible than the thick, rigid plastic some companies use. But here’s the thing: #5 isn’t accepted everywhere for curbside recycling. And that’s where a lot of the confusion comes in.
Wait, before you throw your hands up and say "so I should just toss these in the trash," let’s talk about the process. Curbside recycling programs vary wildly depending on where you live. A few years back, I asked a waste management rep what gives—why do some towns take #5 and others don’t? They told me it’s all about market demand. Right now, there’s a bigger market for #1 and #2 plastics (think water bottles and milk jugs), so recycling facilities often sort those first and pass on #5 because it’s less profitable. But that’s changing—fast. More and more companies are using recycled PP for things like garden furniture, new ALCs, even car parts. So a lot of towns are updating their programs to include #5 now.
But here’s the catch with ALCs specifically: they have that attached lid, right? So it’s one piece, not two separate parts. Some people think that if the lid is stuck on, the whole thing is too hard to recycle. I get it—when you throw a clamshell container into a bin, you’re like, "will this get stuck in the sorting machine?" The truth is, modern sorting tech (like optical scanners that identify plastic types by their molecular makeup) can handle a whole ALC just fine. As long as it’s clean, of course. Food residue is the enemy here—even a little bit of sauce or flour can contaminate an entire batch of recycling. I always tell my customers: rinse it out with a little soap and water, or wipe it with a paper towel, before tossing it in the bin. It takes 10 seconds, and it makes all the difference.
Now, let’s talk about the elephant in the room: contamination. I see this all the time—customers send me photos of their recycling bin with ALCs covered in pizza grease, or half-eaten yogurt still inside. That’s a problem. When food gets stuck in plastic, it creates organic matter that breaks down into bacteria, which ruins the plastic for recycling. So even if your town takes #5, a greasy ALC might end up in a landfill anyway. So my rule of thumb? If you can scrape out the food or wipe it clean, it’s recyclable. If it’s caked on and you can’t get it, toss it in the trash—no shame. I’d rather someone do that than try to force it into recycling and contaminate a whole load.
But wait—what if your town doesn’t take #5? Don’t panic. There are other options. A lot of grocery stores (the big chains, anyway) have plastic recycling bins near the front doors specifically for #1 through #7 plastics. You can drop off your used ALCs there, and those bins go to facilities that process hard-to-recycle plastics. I know one bakery I supply doesn’t have curbside #5 pickup, so they bring all their used ALCs to the local grocery store every week. They keep a big bin in the back of the shop, and their staff dumps it in when they go get supplies. It’s become a routine, and they tell me their customers love that the bakery is making an effort to recycle.
Another thing I get asked: "are these things really made from recycled plastic?" Good question. Not all ALCs are, but I made the decision a couple of years ago to only offer ALCs that have at least 25% post-consumer recycled (PCR) PP. Why? Because when my customers choose my containers, they’re not just buying a product—they’re making a choice to reduce their environmental impact. And honestly, PCR PP works just as well as virgin plastic for ALCs. I test every shipment we get, so I can promise you that you’re getting the same durability, same "snick" lid, same quality, just with less new plastic going into the world.
Let’s talk about what happens to a recycled ALC, too. I did a site visit last year at a recycling facility that processes #5 plastics. They take the whole ALCs, sort them by hand (the scanners pick them first, but some still need a second check), then shred them into little flakes. They wash those flakes to get rid of any remaining food or labels, then melt them down into pellets. Those pellets get sold to manufacturers who make new things—like new ALCs, but also things like planters, storage bins, even automotive parts. It’s a closed-loop process, which means nothing goes to waste. I saw that first-hand, and it’s why I don’t stress too much about whether an ALC is recyclable—because if you handle it right, it’s part of a cycle.
Of course, there’s always room for improvement. I know some people say ALCs are too much plastic, or that we should switch to compostable containers. But here’s the thing: compostable plastics need specific conditions to break down—commercial compost facilities, which are way less common than recycling facilities. If you throw a "compostable" ALC in your backyard bin, it might not break down at all, and it can even attract pests. ALCs, on the other hand, are durable, reusable (hey, I use old ALCs to store screws in my garage!), and when they’re recycled, they keep being useful for decades. It’s not a perfect solution, but it’s a good one—especially for businesses that need containers that hold up through busy days of takeout or storage.
A while back, I had a customer who ran a chain of coffee shops. They used to switch to "compostable" ALCs, but they came back to me after 6 months and said they were wasting way more money because the compostable ones broke too easily—leaking coffee, getting crushed in delivery, even falling apart in the trash. They told me, "Your ALCs might be plastic, but we only need to replace them once a year, whereas the compostable ones were a disaster in a month." That’s the trade-off, right? It’s about balancing functionality with sustainability.
Now, let’s get back to the original question: can attached lid containers be recycled? The short answer is yes—when done right. Here’s the breakdown, in plain English:
- They’re mostly made of #5 plastic, so check your local recycling program to see if they take #5 curbside.
- If not, drop them off at a grocery store plastic recycling bin.
- Make sure they’re clean—no food residue.
- Reuse them first! That’s the most sustainable step of all. I can’t stress that enough. Before you toss an old ALC, think: can this hold my kid’s crayons? My garden seeds? Leftovers in the fridge? I reuse mine for everything, and I bet you will too once you start.
I know it’s not always straightforward. I get customers messaging me at 9 PM panicking because they have a pile of used ALCs and don’t know what to do with them. That’s why I always tell them to hit me up—even if they just have questions about their local recycling rules. I spend a lot of time researching different programs across the country, so I can point them in the right direction.
At the end of the day, I’m not an environmental scientist (though I play one at trade shows), but I know this: ALCs are here to stay. Takeout, meal kits, food storage—they’re essential for small businesses and homes alike. And the better we get at recycling them, the less they’ll end up in landfills. That’s why I’m always working on new things: like a line of ALCs made with 50% PCR plastic, or partnering with recycling facilities to make sure more of our containers actually get recycled.

If you’re a business owner looking for ALCs that are durable, affordable, and recyclable (even better, made with recycled plastic), I’d love to chat. We can talk about bulk pricing, custom sizes, or even how we can work together to set up a take-back program for your used containers. I don’t do fancy sales pitches—just straight talk, good product, and a commitment to doing right by your business and the planet.
Food Crates References:
- U.S. Environmental Protection Agency. (2023). Plastics: Material-Specific Data. Retrieved from EPA’s waste management program resources for municipal solid waste.
- American Chemistry Council. (2022). Polypropylene Recycling: Market Trends and Infrastructure Update. Report on PP recycling volumes and end-use applications in the U.S.
- Plastic Industry Association. (2021). Guide to Curbside Recycling of #5 Plastic. Resource for consumers and small businesses on accepting #5 in local recycling programs.
- Municipal Solid Waste Association of North America. (2023). Contamination in Recycling Bins: Impact of Food Residue on Batch Quality. Study on how food residue reduces recycling rates for hard plastics.
Ningbo Simple Trading Co., Ltd.
Ningbo Simple Trading Co., Ltd. is one of the most professional attached lid containers manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please feel free to wholesale custom made attached lid containers from our factory.
Address: Room 908, Star International Office Building, No.1359, Tiantong South Road, Yinzhou District, Ningbo City, Zhejiang Province.
E-mail: Simpleexport@nbsimpletrading.com
WebSite: https://www.logisticsequipments.com/