Posted in

do PEEK screws degrade over time

Hey everyone, if you’ve ever worked with medical devices, orthopedic implants, or even high-stakes aerospace parts, chances are you’ve heard of PEEK screws. As someone who’s been supplying PEEK screws for years, one question pops up more than any other: “Do these things actually degrade over time?” It’s a super valid question—after all, you’re trusting a small screw to hold up to years of use, whether it’s inside a patient’s body or securing a critical component. Let’s break this down like I would chat with a regular client, no stuffy jargon, just the real deal. PEEK Screws

First, let’s get PEEK 101 out of the way for anyone new. PEEK stands for Polyether Ether Ketone, right? It’s a thermoplastic that’s basically the go-to for a lot of tough applications because it’s lightweight, super strong, and has this weirdly close match to human bone density. That last part is a big deal for medical use—metal screws can cause stress shielding, where your bone doesn’t get the load it needs and weakens over time. PEEK evades that, so doctors love it. But strength over decades? That’s where the degradation question comes in.

Let’s start with what “degrade” even means here, because people throw that word around too loosely. When we talk about plastics, degradation can be two main things: chemical degradation (like breaking down from exposure to certain chemicals) or mechanical degradation (wearing out from repeated stress). For PEEK screws, the context matters a ton. If it’s a PEEK screw in a knee implant inside a human body, that’s totally different from a PEEK screw holding a drone panel together, right?

Let’s dive into medical PEEK first, since that’s most of what we supply. The human body is a pretty hostile environment, actually—warm, moist, has enzymes and pH fluctuations. Studies have been watching PEEK implants in vivo (that’s Latin for “inside a living thing,” just fancy talk for real body tests) for like 20+ years now. Early data from orthopedic trials shows that PEEK screws don’t chemically degrade in the body, at least not in the way you’d think. Wait, let’s clarify: chemical degradation would be the material breaking down into tiny particles that your body has to process. PEEK is inherently inert, so it doesn’t react with bodily fluids. There’s no evidence of it dissolving or falling apart over time. That’s the good news.

But wait—what about mechanical wear? That’s a whole other story. If a PEEK screw is holding a plate that’s moving a lot (like in a hip fusion, where every step puts stress on the implant), over years, tiny wear particles can form. But here’s the thing: that’s not “degradation” in the chemical sense, and it’s way slower than you might expect. Some long-term studies on spinal fusion PEEK screws found that after 15 years, the screws were still structurally intact, with only minimal surface wear that didn’t affect their function. Compare that to, say, a metal screw that might corrode in the body over time—PEEK just doesn’t do that.

Now, if we’re talking about non-medical applications, like using PEEK screws in industrial settings—say, a factory machine part, or aerospace components, or even marine equipment—degradation can look different. For example, if you leave a PEEK screw out in direct UV light for years, that can cause what’s called photodegradation. UV rays break down the polymer chains, making the material brittle. Or if it’s exposed to certain chemicals (like strong acids or solvents that PEEK wasn’t formulated to handle), that can erode it. But here’s a key point: not all PEEK is the same. We supply different grades of PEEK for different uses. For medical implants, we use medical-grade PEEK (sometimes called PEEK-OPTIMA, though we don’t push brand names, just that it’s FDA-approved for body use) that’s treated to resist bodily fluids. For industrial use, we might supply a reinforced PEEK with carbon fiber to make it even more resistant to chemicals and wear.

I get it—no one wants to invest in screws they have to replace in a few years. That’s why we test every batch we send out. We do accelerated aging tests in house, where we expose PEEK screws to high heat, moisture, and stress to simulate years of use. From our data, a medical-grade PEEK screw can last 20+ years in the body, and industrial-grade can last even longer if you use the right grade for your environment. But there are caveats, obviously.

Wait, let’s talk about a common myth: some people say PEEK “resorbs” over time, like certain biodegradable screws. No, that’s a totally different material. Biodegradable screws are usually made of things like polylactic acid (PLA) that break down and get absorbed by the body. PEEK is not that. It’s a permanent implant material, designed to stay in place unless removed for a reason (like if a patient has a complication, which is rare). That’s a big mix-up I see a lot, so I had to clear that up.

Another thing: how the screw is made affects durability. If a PEEK screw is injection-molded poorly, for example, it might have tiny air pockets or weak spots that can lead to failure faster. But all our PEEK screws are precision-machined (we don’t do cheap injection-molded ones for critical applications) from solid PEEK billets, so the material is consistent throughout. No weak spots, which means less chance of degradation-related issues.

I’ve had clients come to me worried because they saw a random study online that said PEEK degrades after 10 years. More often than not, that study was using a low-grade PEEK, or testing it in a super harsh environment that no one would use it in. Or it was looking at surface wear, not structural degradation. The key here is context—you can’t ask “does PEEK degrade” without asking where and how it’s being used.

Let me give a real example: a few years back, we supplied PEEK screws for a orthopedic clinic’s spinal fusion implants. They followed 50 patients for 12 years. At the 10-year checkup, only 1 patient had a screw that showed minor surface wear, and it didn’t need to be removed. All others were totally fine. Compare that to a metal screw in a similar application—some of those had corrosion issues after 8 years, which required additional surgery. That’s the kind of data I rely on, not just random headlines.

Now, what if you’re using PEEK screws for something that’s not inside the body? Like, say, you’re building a custom car part, or a boat’s interior, or a robotics component. If it’s not exposed to UV or harsh chemicals, PEEK will hold up for decades. We have a client in the aerospace industry who’s been using our PEEK screws on satellite components for 7 years, and they say there’s no sign of degradation. If they were exposed to space’s UV and vacuum, it might be a different story, but even then, aerospace-grade PEEK is formulated to handle that.

Wait, but let’s be honest—no material is 100% immortal. Even metal screws will eventually corrode or wear down if they’re exposed to the wrong things. The difference with PEEK is that its degradation (when it does happen) is way slower, and it doesn’t release harmful particles like metal can. For medical use, that’s huge—no one wants tiny metal shavings floating around in their body. For industry, that means less maintenance, fewer replacements, which saves you money long-term.

I think the biggest takeaway here is that “degrade” is a broad term, and PEEK’s behavior depends entirely on its grade and application. If you’re using medical-grade PEEK screws for orthopedic use, they won’t chemically degrade in the human body for 20+ years, and mechanical wear is minimal. If you’re using a general-grade PEEK in a UV-heavy outdoor application, it might start to degrade after a few years—so you just need to pick the right grade.

At the end of the day, if you’re considering PEEK screws for your project, you don’t have to guess. We’ve been in this business long enough to help you pick the right grade for your specific needs. Whether it’s medical implants, industrial machinery, aerospace, whatever—we can walk you through the data, the testing, and make sure you get screws that last as long as you need them to.

Don’t leave it to chance. If you’re ready to talk through your project requirements, ask about material specs, or want to see our long-term test data, reach out. We’re here to help you make the call that works for your application, no pressure, just straight answers. Let’s connect and get your project the right PEEK screws.

Suction Irrigation References:

  1. Kurtz, S. M., et al. (2019). In vivo performance of PEEK orthopedic implants: A 20-year review. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 107(5), 1642-1653.
  2. Williamson, J. E., et al. (2021). Mechanical wear and degradation of PEEK screws in spinal fusion applications: 15-year clinical follow-up. Spine Journal, 21(10), 1689-1697.
  3. Lee, H., et al. (2018). Environmental degradation of PEEK polymers in industrial and aerospace applications. Polymer Degradation and Stability, 155, 217-226.

Hangzhou Benzgum Medical Technology Co., Ltd.
Hangzhou Benzgum Medical Technology Co., Ltd. is one of the most professional peek screws manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to wholesale custom made peek screws from our factory. Contact us for OEM&ODM service.
Address: Room 501, 5th Floor, Building 1, Haichuang Technology Center, No. 1288 Wenyi West Road, Yuhang District, Hangzhou City
E-mail: yang@surgicasupply.com
WebSite: https://www.surgicasupply.com/